International Equipments
Testing Equipment
Testing Equipment
📞 +91 77009 10447
Get a Quote
Peel Tester for peel strength, bond strength and heat-seal strength of films, laminates, labels, tapes and flexible packaging — exported to Kenya from our Mumbai manufacturing works since 1971. CE-certified, built to KEBS, ISO & ASTM (KS ISO 4427, ASTM D1603, ISO 1133).
International Equipments exports Peel Tester to Kenya from its Mumbai manufacturing works, direct, since 1971. The standard model (5 kg load cell, 250 mm travel, 300 mm/min, 90°/180° peel) is built to ASTM D903, ASTM F88, ISO 11339 — compatible with KEBS, ISO & ASTM (KS ISO 4427, ASTM D1603, ISO 1133) — with typical shipping to Kenya of 4–5 weeks (sea freight). Export price on request — email response@internationalequipments.com or request a quote.
Peel Tester for peel strength, bond strength and heat-seal strength of films, laminates, labels, tapes and flexible packaging in Kenya laboratories.
| Product | Peel Tester |
|---|---|
| Model | IE-PT-5 |
| Standards | ASTM D903, ASTM F88, ISO 11339 |
| Load Capacity | 5 kg (50 N) · higher on request |
| Travel | 250 mm (standard) |
| Speed | 0.5 to 500 mm/min |
| Peel Angles | 90° and 180° fixtures |
| Readout | Digital with peak hold |
| Power Supply | 230 V, 50 Hz, single phase |
| Calibration | Factory certificate included; NABL on request |
| Warranty | 1 Year parts & labour; AMC extendable |
| Shipping to Kenya | 4–5 weeks (sea freight) |
| Supply Area | Nairobi, Mombasa, Nakuru, Kisumu, Eldoret, Thika and across Kenya |
Instrument built at our Mumbai works since 1971 — direct export to Kenya with no local distributor markup, FOB / CIF pricing on request.
Every Peel Tester ships with a factory calibration certificate traceable to national standards. NABL-traceable calibration available on request.
Remote commissioning support, video-call operator training and detailed PDF documentation for every Peel Tester exported to Kenya.
Built to ASTM D903, ASTM F88, ISO 11339 — accepted by QC labs worldwide and compatible with KEBS, ISO & ASTM (KS ISO 4427, ASTM D1603, ISO 1133).
Standard models shipped from Mumbai within 4–5 weeks (sea freight) to Kenya via Nhava Sheva / Mundra, with full export documentation.
Spare parts shipped against defect notice; remote diagnosis via email and video call; local service partner available on request.
The Peel Tester is used for peel strength, bond strength and heat-seal strength of films, laminates, labels, tapes and flexible packaging. Built with 5 kg load cell, 250 mm travel, 300 mm/min, 90°/180° peel, the instrument is configured for the ASTM D903 test method and the related ASTM F88, ISO 11339 standards.
In Kenya the Peel Tester is used by flexible-packaging converters, label and tape manufacturers, pharma packagers and FMCG packaging R&D labs. The country's HDPE pipe, agro-irrigation (drip), polymer compounding, FMCG packaging sectors are among its heaviest users. Our Peel Tester supports every ASTM D903 test cycle used by these industries and is compatible with KEBS, ISO & ASTM (KS ISO 4427, ASTM D1603, ISO 1133).
Direct export from Mumbai with full export documentation and remote commissioning support.
Direct export from Mumbai with full export documentation and remote commissioning support.
Direct export from Mumbai with full export documentation and remote commissioning support.
Direct export from Mumbai with full export documentation and remote commissioning support.
Direct export from Mumbai with full export documentation and remote commissioning support.
Direct export from Mumbai with full export documentation and remote commissioning support.
Export via Nhava Sheva (JNPT) to Mombasa Port. Shipping documents, CE compliance and factory calibration certificate included.
Peel Tester in Other export markets: USA · Germany · UAE · Saudi Arabia · UK · Turkey · Australia
Send us your test standard and requirement — our team responds within 24 hours with specifications, pricing and shipping lead time to Kenya.
📧 Send Enquiry 📞 Call +91 77009 10447