A PC-interfaced Method A Melt Flow Index Tester with motorised cutting, automatic weighing and software-based result calculation, storage, averaging and statistical analysis — for labs that need traceable, report-ready data.
The Computerized (Method A) model connects the MFI tester to a PC: motorised cutting and automatic weighing feed directly into software that calculates MFR, stores every result, averages replicates and runs statistical analysis. It removes manual weighing and record-keeping, giving traceable, audit-ready data.
It suits laboratories with reporting and traceability requirements — certification labs, larger processors and R&D. Manufactured in Mumbai, CE marked and supplied with a calibration certificate.
Method A (MFR) with PC software; shared temperature and load system.
| Standards | ASTM D1238, ISO 1133; IS 2530, IS 10810 |
|---|---|
| Temperature range | Ambient to 400 °C |
| Temperature resolution | 0.1 °C |
| Temperature accuracy | ±0.1 °C |
| Controller | Microprocessor auto-tuned PID |
| Test loads | 1.2, 2.16, 3.8, 5, 10 & 21.6 kg (hard chrome plated) |
| Orifice & piston | Hardened, to ASTM D1238 / ISO 1133 |
| Result units | MFR in g/10 min; MVR in cc/10 min & melt density (Method B) |
| Power supply | 230 V, 50 Hz, single phase (export voltages configurable) |
All major thermoplastics within the 0–400 °C range:
Supplied as standard:
Every MFI tester complies with ASTM D1238 and ISO 1133, plus IS 2530 and IS 10810 for Indian standards, and is supplied with a traceable calibration certificate. Method A measures Melt Flow Rate (MFR) by cutting and weighing the extrudate; Method B adds Melt Volume Rate (MVR) and melt density via a piston-travel sensor.
Send your material, test standard and throughput. We'll respond within one business day with a configuration and quote.
Request a Quote
